News

Home > News > Content
Surface Physical Characteristics Of Cotton Swabs
Oct 27, 2017

Swab swabs can be used to clean areas, cracks, and crevices that cannot be reached or cleaned in traditional ways. Once the swab has picked up the residue, it cannot be let out. Swab sampling may be the most widely used cleaning confirmation sampling technique. This is the most important part of the clean validation assessment.Cotton Swabs

The physical characteristics of the cotton swab and the substrate surface and the physical wiping movement play a role in the physical confirmation program. The chemical program involves getting a sample of the object to be analyzed from the substrate surface with a wet swab, then extracting the analysis from the swab, and finally putting the swab in the recovery solution. The steps of wiping the movement must be standardized so that the process of analysis and research can be reproduced and confirmed by wiping movement. This procedure should be included in the standard operating procedures.Cotton Swabs

There is a special way to dip a wet swab head and prevent the residue from spreading out and into the surrounding surface due to excessive liquid on the head of the swab. Technical errors can lead to conflicting results. Cotton swabs need to be moistened rather than thoroughly soaked. After cleaning the small bottle and cotton swab, the TOC of the solution is not more than 10PPB, and the cotton swab does not exceed 50ppb.Cotton Swabs

Use cotton swabs for confirmation and cleaning. The technician uses a cotton swab to erase only one square inch of the area for surface recognition. People often break the handle of these cotton swabs so that they can be placed in a container filled with a solution to extract particles from the swab.Cotton Swabs


Previous: No Information

Next: Bandages Wrapping Method